Skip to content
DIVASby Movilift

DIVAS · Home lift

The home lift that feels like part of the house.

An Italian platform lift for homeowners, architects and builders: it fits existing houses and new builds with a 150 mm pit, stands inside or outside the house, and is finished to match the interiors.

EN 81-41 · 2006/42/EC · Made in Italy

Installed DIVAS: open cabin with white panels, stainless steel trims and a wooden floor, on a terrazzo landingInstalled project
countries with DIVAS installed
50+
countries with DIVAS installed
minimum pit
150 mm
minimum pit
stops, up to 25 m travel
7
stops, up to 25 m travel
rated load
250–650 kg
rated load

Designed for homes, under the Machinery Directive.

DIVAS is a vertical lifting platform built to EN 81-41 and the Machinery Directive 2006/42/EC, not to the passenger-elevator standards used in apartment blocks. That is what lets it fit where an elevator would not: a shallow pit, low headroom, a slim self-supporting shaft that can stand inside a stairwell, against a wall or outside the house.

  1. 01

    Fits existing homes

    A shallow pit and compact shaft mean little or no structural work. Most installations are in houses that were never designed for a lift.

  2. 02

    Quiet and smooth

    A slow, steady 0.15 m/s ride, soft starts and stops, and a cabin that stays level with every floor.

  3. 03

    Accessible

    Cabins sized for a wheelchair and a companion, with level access, handrail and emergency lowering.

  4. 04

    Made to measure

    Shaft, cabin, doors and finishes are built to your floor plan in our factory near Naples.

It goes where your house has room for it.

In the stairwell, in a corner of the living room, through the floors of a new build or in a glass shaft against an outside wall. DIVAS comes with its own self-supporting shaft, or fits into an existing masonry shaft if there is room: it adapts to the house, not the other way round.

Black DIVAS landing door with frosted glass and an Axis Modula call panel on a villa landingVisualisation

Inside the house

A landing door that looks like the other doors of the house, a call panel at hand height and a cabin that opens straight onto the room.

Installed DIVAS: external glass shaft with grey aluminium profiles against a brick wallInstalled project

Outside the house

When there is no room indoors, a glass and aluminium shaft connects the garden to the terrace and the upper floors, without touching the interiors.

MRL or hydraulic: choose by climate, load and budget.

DIVAS in a glass shaft beside a floating staircaseVisualisation

Gearless, oil-free

DIVAS MRL

A permanent-magnet gearless motor inside the shaft. No oil, low consumption, less maintenance, and steady behaviour in cold climates.

Rated load250 – 400 kg

DIVAS with a wooden cabin in a classic entrance hallVisualisation

Higher loads, lower price

DIVAS Hydraulic

A piston under the cabin and a compact power unit at the bottom of the shaft, for higher rated loads. The best value in temperate climates.

Rated load250 – 650 kg

DIVAS cabin in light oak with a full-height Axis Modula panelVisualisation
Installed DIVAS: glass cabin with a patterned LED ceilingInstalled project

Personalise every surface.

Walls, floor, ceiling, doors and controls are chosen one by one: stainless steel, laminates, RAL colours and Plalam for everyday elegance, and the Luxury line with Italian marble, Sorrento wood inlay and hand-stitched leather for architects and interior designers.

  • Italian marble
  • Sorrento wood inlay
  • Leather
  • Italian marble

Brushed stainless steel · Italian marble · Sorrento wood inlay · Leather · RAL powder coat · Glass

Axis Modula car operating panel

Axis Modula controls

A slim glass panel with a colour display you can personalise with your own images and messages. Same family at every landing.

For builders and developers

One lift, specified once, installed in every home.

Building ten villas or five hundred? DIVAS is designed to be repeated: the same shaft, cabin and finishes on every unit, drawings from our technical office for each floor plan, and a straightforward installation for your installers.

Installed DIVAS: external shaft with a brown steel frame and glass panels against a brick buildingInstalled project
  • Self-supporting or masonry shaft

    A self-supporting steel and glass shaft, with no concrete walls to build, or an existing masonry shaft if there is room. Either way, a 150 mm pit and no deep excavation.

  • Fits the building schedule

    The shaft goes up once the floors are in. Panels, doors and cabin follow, with no wet trades.

  • One specification for the whole project

    Choose cabin, doors and finishes once; every unit arrives the same, with its own drawing.

  • Technical support for your installers

    Our technical office follows your team from the first drawing to commissioning.

Modern villa with solar panels on the roof and an external DIVAS glass shaftVisualisation

Zero Energy

Runs on sunlight. Keeps running in a blackout.

Two solar panels and on-board batteries power DIVAS Zero Energy. When the grid is down, the lift keeps working on its batteries; when the sun is out, it costs almost nothing to run.

How Zero Energy works

From Sydney to Dubai, DIVAS is at home in more than 50 countries.

A selection of real installations by our partners.

Some of the cities with a DIVAS

Algiers · Amman · Belize · Bordeaux · Budapest · Cairo · Constanța · Cotonou · Dhaka · Doha · Dubai · Hanoi · Ho Chi Minh City · Jakarta · Jeddah · Jerusalem · Kuwait City · Valletta · London · Manama · Melbourne · Mexico City · Muscat · Naples · Novigrad · Panama City · Perth · Praia · Punta Cana · Riyadh · Santiago de Chile · Santo Domingo · Skopje · Sydney · Tirana · Tripoli · Umag · Valparaíso · Victoria · Warsaw

  • Installed DIVAS: stainless steel cabin with automatic doorsInstalled project
  • Installed DIVAS: black landing door with frosted glass in a slatted timber wallInstalled project
  • Installed DIVAS: swing door open onto a glass cabinInstalled project
  • Installed DIVAS: view from inside a glass shaft towards the treesInstalled project
  • Installed DIVAS: black landing door with frosted glass and a call panel beside itInstalled project

From your floor plan to the first ride.

  1. 1

    Tell us about your home

    Floors, available space, who will use the lift. A photo or a sketch of the stairwell is enough to start.

  2. 2

    We design it to fit

    Our technical office sends you a drawing with the shaft, cabin and doors sized for your space, and a quote.

  3. 3

    Built in Italy

    Every DIVAS is made to order and tested in our factory in Castellammare di Stabia, near Naples.

  4. 4

    Installed and looked after

    Installation and maintenance are carried out by a qualified installer in your country, with our technical support.

Before you start

All questions

Let's see if DIVAS fits your home.

Send us the floors and the space you have. We'll reply with a drawing and a quote, with no obligation.

Request a quote